SolutionsBatteries · Connected hardware

Battery monitoring that says when to replace it

AllBattery · TAB · Solvesall

AllBattery is our battery management system: hardware, firmware and a phone app that show a battery’s charge, health and use, and suggest when it needs replacing. The maker sees every battery in the field.

The AllBattery phone app: a battery at 73 percent, with voltage, current, temperature, charging cycles, capacity and a suggested battery change in two years
  • 6 readingsVoltage, current, temperature, cycles, capacity, charge left
  • Replace in timeThe app suggests when to change the battery
  • Over the airFirmware is updated through the app
  • Whole fleetMakers see use and status of every battery

In short

For
Battery makers, and makers of products that carry batteries
The problem
A battery is a black box: its real condition shows only when it fails.
What it does
Hardware, firmware and cloud software that watch each battery and say when it needs attention.

How it works

How AllBattery works

A battery gives little warning. AllBattery measures it, shows the owner what is going on, and sends the maker the data from every battery in use.

  1. Measure in the battery

    Hardware reads voltage, current, temperature and charging cycles.

  2. Show it in an app

    Owners see charge, capacity and a suggested replacement date.

  3. Collect it in the cloud

    Makers get usage and status data from the whole fleet.

  4. Update and advise

    Firmware is updated over the air, and early warnings and replacement suggestions follow.

Who it is for

For battery makers and the products that carry them

The problems it solves

  1. A battery’s real condition is unknown until it fails.

  2. Replacing too early wastes money, too late leaves the user stranded.

  3. Makers never see how their batteries are used after they are sold.

Built for
  • Battery manufacturers who want a connected app for their product
  • Makers of motorhomes, trailers and boats that fit batteries

What changed

Before and after

Before

Battery state is guessed, faults are found when the battery fails, and the maker has no data from the field.

After

Charge, health and use are visible in an app and in the cloud, and replacement is suggested in time.

Client
TAB, battery maker
Consists of
Hardware, firmware, phone app, cloud analytics
Updates
Over the air, through the app
Made by
Solvesall, Ljubljana

Talk to us

30 minutes about your case, with the engineers who built this. No slides.

Prefer email? info@solvesall.com